FREE SHIPPING OVER $30, ALL ORDERS SHIPPING FROM USA WAREHOUSE
Home > RC UAV & Drones > ESC > Exceed RC > Exceed RC Proton/Volcano 30A Brushless ESC Speed Controller 07E04-Proton-30A
Exceed RC Proton/Volcano 30A Brushless ESC Speed Controller 07E04-Proton-30A
Exceed RC Proton/Volcano 30A Brushless ESC Speed Controller 07E04-Proton-30A
Item Code: 07E04-Proton-30A


$17.78
Out of stock


cification

1.1 Output:  Continuous 30A, Burst 40A up to 10 Secs.
1.2 Input Voltage:  2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.   
1.3 BEC:  2A / 5V (Linear mode).
1.4 Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
                               (BLM: BrushLess Motor)
1.5 Size:  45mm (L) * 24mm (W) * 11mm (H).
1.6 Weight: 25g.

2  Features

2.1 Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
      - Brake Setting: brake enabled / brake disabled.
      - Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
      - Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
      - Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
     - Start Mode: normal / soft / very soft.
      - Timing: low / medium / high.
      - Reset:  reset  all  the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

3   Advantages
 
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
3.4 Compatible with Hobbywing's program card
Please click here for User's Manual