The best selling Exceed RC XH400 now comes with the new Devo 7 transmitter and Devo receiver with built-in 3 axis gyro system. The Devo 7 is a 100% fully programmable transmitter so beginners to advanced pilots can fine tune the settings for different flying styles.
What's unique about the XH400 you ask? First off Exceed RC is well known in designing and manufacturing remote control helicopters, and supplied them in the highest quality at competitive prices. With the popularity of flybarless helicopters increasing over the years Exceed RC incorporated the same technology into the XH400 without the high price tag. Traditional helicopters have a thing called a flybar which is a mechanical stabilizer with a lot of moving parts. To keep things short the XH400 is now flybarless which has the mechanical stabilizer removed and instead have been replaced with the state of the art Exceed RC 3-Axis gyro system and flybarless technology. The main advantage of being "flybarless" is there are less moving parts and allows slightly longer flight times all while having the same stability as a flybar setup.
The 6 channel Exceed RC XH400 comes pre-adjusted out of the box so there is no guess work on how to properly setup the helicopter. The Devo 7 transmitter has all of the flight settings already programmed in so all the pilot would have to do is charge the flight battery, install 8AA batteries to the transmitter, and read through the operating manual while the flight battery is charging with the included AC Lipo balance charger.
The XH400 features Exceed RC's flybarless 3-axis gyro auto stabilizing technology for precise, stable, and smooth flying. A brushed 380PF main motor, brushed tail motor, ESC, and digital servos all pre-installed and already adjusted for the first flight out the box. Having a a brushed main and tail motor helps make the XH400 affordable for pilots who wants the next step up helicopter without leaving a hole in their pocket. Want to learn how to fly inverted? Want to learn how to do flips? Want to learn how to practice simple 3D maneuvers? The 6 channel XH400? is perfect for intermediate and advance pilots, as it would be the perfect next step up for beginners who is stepping up from a 4ch co-axial or 4ch fixed-pitched? helicopter. Now we have to admit despite the XH400 having a brushed motor and tail motor, we found the 380 size brushed main motor more than powerful enough for what the helicopter was designed for and the tail motor held up just fine. Having a brushed tail motor eliminates the difficult setup without having to worry about setting the rudder servo perfect for flight. What all this means is Exceed RC designed the XH400 to have the same performance as the higher cost models yet very easy to maintain at the same time.
Main Rotor Diameter: 635mm
Tail Rotor Diameter: 136mm
Overall Length: 650mm
Overall Weight: 510g (Battery included)
Battery: 11.1V 1200mAh Li-Po
Main Motor: 380PF
Tail Motor: 1627PF
Gyro: Exceed RC 3-axis Flybarless System with built in Receiver. (Devo version)
Transmitter: DEVO-7 2.4Ghz (DSSS) ARM micro computer system encoder (requires 8 AA Batteries)
- Metal Rotor Head flybarless design. Improved with low power loss and great efficiency
- Controlled by 3-axis gyro with flybarless balance electronic system. Amend flight status automatically. Stable flight and flexible 3D performance.
- High performance brush motor powered by 11.1V 1200mAh Lipo battery. 8 minutes flight time after full charged.
- 2.4 GHz spread spectrum technology automatically assigns ID code with strong anti-jamming technology and high accuracy.
- 2 Model Type: Helicopter and Airplane. Improved programming with more mixes and better interface
- 7-point throttle curve and Fifteen-model memory
- Online update function: Enjoy updating the latest program and model data easily
- Highly affordable RTF version
Needed to complete
- 8 AA batteries for the Transmitter