Nitro Model Raven 30 size 4 Channel Aerobatic 3D Electric Plane Kit 1245 Wingspan RC Remote Control Radio
Nitro Model has provided us an impressive scale aerobatic airplane built and designed to perform breathtaking maneuvers. The scale construction, similar to an SBach 342, captures the essence of the aerobatic 3D plane qualities, allowing pilots to try freestyle and different style of aerobatic flying without concern. The Nitro Model Raven is perfect for intermediate and advanced pilots.
The Nitro Model Raven 30 size kit plane has a wingspan of 49 inches. The square profile of the wing combined with low wing loading allows the plane to handle exceptionally well during high and low speed maneuvers. An aluminum wing spar keeps the wing from flexing during those high G exercises. The Raven is very dynamic, allowing for snap rolls to be precise and effortless. The chassis and airframe is constructed of quality balsa and stretches approximately 47 inches in length. The cowl is molded of fiberglass to give the Raven a beautiful aerodynamic profile. The canopy is removable for easy access to the electronics and battery compartment. Below the fuselage you will find a stout landing gear constructed of aluminum for strength and flexibility.??
With its cutting edge and innovative modern design, the Raven excels in precise 3D flight. This plane is absolutely made for precision flying and has lots of potential for the pilot to advance their skills. The Raven captures the attention of everyone who sees it up the air. Finished with a beautiful monocoque skin, this plane will look beautiful in the sky or taxing on the runway. The package comes with detailed assembly instructions so you can quickly get your new plane up in the sky. You are sure to be impressed with its build quality and ease of assembly.
The Nitro Model Raven is a kit plane requiring the builder to acquire their electronics and power system of their choice. We recommend mini size high torque and high speed servos. A brushless motor and ESC combo system is also required to power the plane. A radio system with at least 4 channels is also recommended to complete the build.
Wingspan: 49" (1245mm)
Length: 47" (1190mm)
Wing Area: 457sq in (39.5 dm2)
Flying Weight: 2.6-2.9lbs (1200-1300g)
Required to Fly:Click here for User's Manual
Assembly of Plane
Propellar APC 13x6.5-E and Spinner
4-6 Channel Radio System
Brushless Motor: A3714 OUTRUNER
Brushless Electronic Speed Controller 45 Amp
Li-Po 3-4 cell