A quadcopter is a machine that is lifted and propelled by four rotors. Unlike most helicopters, a quadcopter use symmetrically pitched blades mounted on four motors to produce lift. Controlling the speed of these individual motors allows the machine to move forward and backward, up and down, strafe left and right, and rotate clockwise and counterclockwise.
Dynam has entered the quad market industry and has produced a rather unique machine dubbed the Quadcopter 650. The frame is constructed with .5 in box aluminum mated with g10 composite legs and main frame. The g10 legs house the motors and have a clever spring loaded actuation that allows the legs to compress while landing. This is especially useful when landing on uneven surfaces or dampening harder landings to prevent shock and damage to the electronics. The Quadcopter almost ready to fly version comes with four 700KV motors with 2812 stators installed. Four 18 amp dynam brushless speed controllers are pre-soldered to the main board. The main board is also pre-tinned to readily accept a flight control board of your choice. 11x4.7 propellers are also included to provide ample thrust and performance.
Size: 650mm quad copter
Motor: Four BM2812M-700KV Detrum Brushless Motors
ESC: Four Detrum 18 Amp Brushless Speed Controllers
Propeller: 11x4.7 Propellers.
Required to Fly:
Assembly of Props
Flight Control Board
Recommended Electronics to Complete Build:
6 Channel Transmitter
6 Channel Receiver
Battery 11.1v 2200mah 20C
3cell Balance Charger