FREE SHIPPING OVER $30, ALL ORDERS SHIPPING FROM USA WAREHOUSE
New 6 CH HeliPro Black Hawk 450 SE CCPM 3D Aerobatic R/C Electric Helicopter RTF w/ CNC Rotor Head /Tail Brushless Set & 2.4 GHZ Radio System
Item Code: 18H05-HeliProBlackHawk450



$299.95
Out of stock


New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club?s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx.

This Brand New 2.4 GHZ Digital 6 Channel all Aluminum Black Hawk 450 SE RTF is a Complete RC Helicopter ready to Fly and is 3D ready! Powerful 3500KV Brushless Motor, 35A Brushless ESC, Professional Head Lock Gyro, High Capacity 11.1V 1800mAh 15C Li-Po Battery, 2.4 GHZ Digital 6CH Radio & Receiver, Aluminum and Fiberglass combined to create this ultimate helicopter! Complete Ball Bearings and Belt Driven Tail give you the reliability you want, and the confidence you need! All the options of the T-Rex SE for much less!

   

 

Feature:

  • 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
  • New 6 channel 2.4 GHZ Digital Transmitter with PIT/PLT mode lock switch and adjustable knob
  • High quality CNC aluminum alloy rotor head & tail set
  • High rigidity aluminum tail boom
  • Reinforced maximum durability fiberglass main frame
  • State of the art components such 3500KV Brushless Motor, Sensorless 30amp Speed Control, and 1800mAh 15C 11.1 Volt Li-Po Battery Pack
  • All the options of the T-Rex SE for much less!
  • NOR collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
  • Plenty of power and head speed for sport flying and aerobatics
  • Professional individual head lock gyro
  • Reliable gear system
  • Accurate tail pitch control system
  • Tail servo mount for accurate rudder control
  • High intensity stainless steel shaft
  • 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
  • CCPM mode with adjustable pitch system and 3D conversion
  • Tail rotor driven by belt transmission system provide stable flight and low noise
  • Mode lock switch to free lock the parameters of PIT & PLT
  • Main rotor driven by powerful Brushless Motor
  • NO TAIL Motor - Tail rotor driven by main motor with servo controlled rudder like gas helicopters
  • No need to worry about burning tail motors
  • Tail blade adopt flameout landing system
  • Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
  • Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
  • Perfect for people who wants to move up from 4ch helicopter
  • PCM receiving and transmitting system increases the operation stability
  • Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
  • Almost Unbreakable Rotor Head
  • Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
  • Newly Designed Rotor Head gives better control
  • Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
  • Extreme smooth control and stable flight
  • Precise controlling and hovering
  • Can fly in skyway, backward, and 3D aerobatic
  • Suitable for Outdoor/Backyard/Stadium
  • Using the Ultra tough Aluminum Alloy and Carbon Fiber materials, the Helicopter does have very strong structure
  • Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
  • All spare parts and accessories are available
  • Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)
Specification:
  • Main Rotor Diameter: 680mm (26.75 inch)
  • Tail Rotor Diameter: 154mm (6 inch)
  • Overall Length: 820mm (32.25 inch)
  • Height: 228mm (9 inch)
  • Width: 121mm (4.75 inch)
  • Flying Weight: 530g (Battery included)
  • Drive system: 3500KV Brushless Motor
  • Servo: 4X 9g
  • Gyro: Professional Headlock Gyro
  • ESC: 30A Brushless Speed Controller
  • Battery: 11.1V 1800mAh 15C Li-Po
  • Control system: 2.4 GHZ Digital 6CH CCPM Multifunctional Transmitter and Receiver
  • Radio Control Range: 2500 feet (762m)
Package Include:
  • Helicopter (100% Assembled)
  • 2.4 GHZ Digital 6 Channel Multifunctional R/C Transmitter
  • 11.1V 1800mAh 15C Li-Polymer Rechargeable Battery
  • Main Blade Holder
  • English Manual