Order by calling 1-562-949-9860. Mon–Fri 9:00AM – 4:00PM (PST)
Align RC 6 Channel Helicopter T-REX700E PRO DFC HV Super Combo RH70E06X ARF
Align RC 6 Channel Helicopter T-REX700E PRO DFC HV Super Combo RH70E06X ARF
Item Code: 15H-RH70E06X-700E-Pro-DFC-HV-SuperCombo-ARF


Out of stock

Instruction(3GX Programmable Flybarless System) :
  • Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts.
  • 3GX is currently the smallest and lightest flybarless system on the market. Two ports to directly connect Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
  • Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the market including 90, 120, 135, and 140 degrees swashplates.
  • Graphical illustrated instruction on the computer setup software directs the user through a step by step setup process, allowing for quick setups without omitting any steps.
  • Support Bluetooth connectivity. With the soon to be released Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live adjustments to 3GX without powering down.
  • With 3GX's built in Align RCE-G600 governor function, no external governor is needed to reduce electronic wire clutters.
  • Custom parameters have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom settings to be shared amongst friends.
  • 3GX utilizes brand new gyroscope sensors of the highest specifications when compared to other flybarless systems currently on the market, allowing it to be used under harsh conditions. Dual axis plus rudder sensor dramatically improves swashplate and rudder correction precision compared to last generation 3G. This is clearly noticeable in stable hover as well as highly aerobatic routines.
  • Suitable for helicopter of all class from 250 to 800, glow engine or electric powered. The superior vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
  • 3GX utilizes 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
  • With built in pirouette compensation function, 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips type of maneuvers are easily accomplished with precision.
  • 3GX's rudder allows consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
  • Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, and even autonomous way point flights as well as return home.

  • Specification(T-REX 700E DFC) :
    1. Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed.
    2.New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    3.Equipped with brand new 700 3G carbonfiber main blades designed specifically for extreme 3D flights, featuringagility and stability, and new graphics paint scheme. The increased blade rigidity improves antitorsion characteristic during flight, and the new airfoil minimizes turbulencenear the blade tip, reducing blade noise and power loss.
    4.Brand new tailblade designed to sustain optimal tail locking performance under high headspeed and extreme flight conditions.
    5. Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more precise control reaction.
    6. Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a clean and uncluttered look.
    7. Utilizes composite carbon material integration technique on frame structure for ease of maintenance and high rigidity. Increased front opening area to allow for simpler battery installation.
    8. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
    9. Top mounted motor base bringing the motor's center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively.
    10. Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
    11. Utilizes high spec MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and minimize gear noise during flight.
    12. Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
    13. New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation .
    14.800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; itÂ’s capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
    15. Brand new gear box with more streamlined design also allows for simpler disassembly.
    16. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
    17. High torque rated one way bearing base.
    18. High precision bearing supported dual push point rudder control design.
    19. High speed rated thrust bearings incorporated into tail blade grips.
    20. Equipped with third bearing main shaft support to increase rigidity, meeting the needs of extreme 3D maneuvers.
    21. New lightweight landing gears.
    22.New style wrap around airbrushed fiberglasscanopy, with aerodynamic form to reduce wind resistance. 4 point anti-vibration mounts for quickinstall and removal.
    23. New CNC aluminum alloy mounting plate.

    Users must have a certain concept of security to operate the R/C helicopters.
    Be sure to read and comply with related safety notes of instruction manual before flying.

    Specification(3GX Programmable Flybarless System) :
  • Operating Temperature:-10~60 degree
  • X and Y axis Operating Angle Range:-300~+300 degree
  • Z axis Operating Angle Range:-600~+600 degree
  • Size:36.5x25.2x15.6 mm Size
  • Weight11g Weight
  • Supports Wide/Narrow Bandwidth Digital and brushless servos
  • Spektrum and JR Satellite antennas support (Replaces original factory receiver)
  • Futaba S.BUS system support
  • Built in governor function
  • Maximum working voltage:8.5V
  • Compatible with 1024/2048 resolution Spektrum receivers
  • Supports 90/120/135/140 CCPM swashplates
  • Field setup without the use of a PC
  • Compatible with 2 to 5 blades rotor heads
  • Support up to 6 servos
  • Automatic servo type recognization

  • Specification(T-REX 700E DFC) :
  • Length: 1350mm
  • Height: 360mm
  • Width: 208mm
  • Main Blade Length: 700mm
  • Main Rotor Diameter: 1582mm
  • Tail Rotor Diameter: 281mm
  • Motor Drive Gear:12T
  • Main Drive Gear:112T
  • Autorotation Tail Drive Gear: 104T
  • Tail Drive Gear: 22T
  • Drive Gear Ratio: 1:9.33:4.37
  • Weight(With Motor): 3310g

  • Accessories:
  • T-REX 700E PRO DFC Kits Set x 1set
  • 3GX Flybarless system x 1
  • 700 3G Carbon Fiber Blades x 1set
  • BL700H High Voltage Brushless Servo x 3
  • BL750H High Voltage Brushless Servo x 1
  • Aluminum Tail Boom x 1
  • 3K Carbon Fiber Tail Boom x 1
  • 800MX Brushless Motor(520KV) x 1
  • Castle ICE2 HV 120 Brushless ESC x 1
  • 105mm 3K Carbon Fiber Tail Blades x 1set

  • Radio transmitter and electronic equipment required for assembly:
  • Transmitter(7-channel or more, helicopter system)
  • Receiver(7-channel or more)
  • 6S Li-Po 4500 ~ 5200mAh x 2
  • 2S Li-Po 1900 ~ 2300mAh x 1
  • Dial Pitch Gauge

  • ************************************************************************************************************************************

    We appreciate you choosing us for all your RC helicopter needs. Please note that all requested returns and exchanges with Align products will subject to a 15% restocking fee. Any tampered, used, damaged product will not be permitted for an exchange or return.

    Upon receiving any Align product, please inspect the product or items before opening the package. If an item or part is defective upon arrival, please contact Align.
    Align USA would like to provide all technical support for their products. You can contact Align USA at:
    Assurance R/C USA
    Tel: 562-598-4700
    Fax: 562 598-4702
    E-mail: sales@alignrcusa.com
    Thank you and we appreciate your business.


    Trex700 Electric Parts
    700DFC Anti Rotation Bracket H70112

    700DFC Bearing Block(L) H70120

    700DFC Bearing Block(U) H70119

    700DFC Carbon Main Frame(L) / 2.0mm H70114

    700DFC Carbon Main Frame(R) / 2.0mm H70115

    700 3G Carbon Fiber Blades HD700B

    700 Carbon Tail Control Rod Assembly H70073A

    700DFC Canopy Mounting Bolt H70B001XX

    700DFC CCPM Metal Swashplate H70098
    Out of stock
    700DFC Head Damper H70096

    700DFC Main rotor grip arm integrated control link set H70092

    700DFC Main Rotor Head Upgrade Set H70089A

    700DFC Main Rotor Holder Arm H70095

    700DFC Main Rotor Housing Set H70091

    700DFC Main Shaft H70093

    700DFC Swashplate Linkage Rod Set H70116

    700E 104T M1 Helical Autorotation Tail Drive Gear Set H70110

    700E Fiberglass Canopy/White HC7501

    700E Fiberglass Canopy/White HC7641
    Out of stock
    700E Fiberglass Canopy/White HC7651

    700E Latch-type Receiver Mount H70086

    700E Motor Pinion Gear Bearing Mount H70111

    700E Painted Canopy HC7504

    700E Painted Canopy HC7505

    700E Painted Canopy HC7506

    700E Painted Canopy HC7507

    700E Rear Frame Mounting Block H70088

    Canopy Mounting Bolt H70047

    Canopy Mounting Bolt H70087

    CNC Slant Thread Main Drive Gear/110T H80G001XX

    M1 Torque Tube Front Drive Gear Set/22T H70G001XX

    Metal battery mount H70084

    Metal battery mount H70085

    Metal Bottom Plate H70117

    700E PRO DFC Anti Rotation Bracket H70112A

    Bearing Block H70113

    CNC Slant Thread Main Drive Gear set/112T H70021B
    Out of stock
    700E Painted Canopy HC7508

    700E Painted Canopy HC7570

    700E Painted Canopy HC7603

    700E Painted Canopy HC7604

    700E Painted Canopy HC7606

    700E Painted Canopy HC7607

    700E Painted Canopy HC7608

    700E Painted Canopy HC7609

    700E Painted Canopy HC7621

    700E Painted Canopy HC7622

    700E Painted Canopy HC7623

    700E Painted Canopy HC7642

    700E Painted Canopy HC7652
    Out of stock
    700EFL Linkage rod(A) set H70066

    700FL Main Shaft H70035
    Out of stock
    700NA Fiberglass Canopy/White HC7101

    700NB Fiberglass Canopy/White HC7201

    800E Metal Bottom Plate H80B008XX

    Aileron Carbon Fiber Linkage Rod Set H70068
    Out of stock
    Battery Mount H70052

    Bearing Block H70045

    Carbon Bottom Plate/1.6mm H70043

    Carbon Main Frame(L) / 2mm H70041A

    Carbon Main Frame(R) / 2mm H70042A

    Carbon Tail Control Rod Assembly H70073

    Elevator Arm Set H70046

    Frame Hardware H70058

    Frame Mounting Block H70049

    M1 Torque Tube Front Drive Gear Set/22T H70G001AX

    Main Blade Linkage Rod H70069

    Main Frame Parts H70048

    Motor Mount H70053

    Motor Pinion Gear 12T H70054

    Motor Slant Thread Pinion Gear 12T H70062

    Motor Slant Thread Pinion Gear 12T H70G006XX

    Servo Linkage Rod H70067
    Out of stock
    Torque Tube Rear Drive Gear Set H70G005XX
    Out of stock

    WL Toys V686G 5.8 FPV Headless Mode 4ch RC Quadcopter Drone with 2MP Camera w/Real-time Transmission/4GB Memory Card RC Remote Control Radio
    Regular: $195.95
    SALE $49.95

    Limited time offer! Free shipping applies to domestic USA 48 States ONLY. Shipping charge is required for item options, Alaska, Puerto Rico, Hawaii, and for All International Countries.
    SKY Hawkeye 1315S 5.8G RC RTF Home Return Quadcopter with Real-time Transmission with 4GB SD card RC Remote Control Radio
    Regular: $159.95
    SALE $49.95

    Limited time offer! Free shipping applies to domestic USA 48 States ONLY. Shipping charge is required for item options, Alaska, Puerto Rico, Hawaii, and for All International Countries.
    WL Toys V686K 6-Axis Gyro 2.4G 4CH WIFI FPV Real-time Videos Return (Android and IOS compatible device) UFO RC Quadcopter Drone with HD Camera + Headless Mode RC Remote Control Radio
    Regular: $139.95
    SALE $34.95

    Limited time offer! Free shipping applies to domestic USA 48 States ONLY. Shipping charge is required for item options, Alaska, Puerto Rico, Hawaii, and for All International Countries.
    UDI RC U28W 2.4Ghz 4CH 6-Axis Gyro Headless Mode 360 Degree Inverted RC Quadcopter with 1.0 MP 720P HD Camera WIFI FPV
    Regular: $99.95
    SALE $69.95

    Syma OEM Hero RC XQ6 4 Ch 6-Axis Headless Quadcopter Drone RTF 2.4Ghz w/ HD Camera + 3 Batteries + 2 Set Blade + 4GB Memory Card (White) RC Remote Control Radio
    Regular: $98.95
    SALE $44.95

    Tech One RC 4 Channel Venus EPO RC Airplane Kit Version (Red) RC Remote Control Radio
    Regular: $99.00
    SALE $44.95

    Limited time offer! Free shipping applies to domestic USA 48 States ONLY. Shipping charge is required for item options, Alaska, Puerto Rico, Hawaii, and for All International Countries.
    4-CH AirField 64mm Ducted Fan RC Jet Airframe Only (Grey)
    Regular: $99.95
    SALE $79.95

    TechOne Blue Fox 4 Channel RC Depron ARF RC Remote Control Radio
    Regular: $130.00
    SALE $69.95

    Limited time offer! Free shipping applies to domestic USA 48 States ONLY. Shipping charge is required for item options, Alaska, Puerto Rico, Hawaii, and for All International Countries.
    AeroSky RC Sky Trainer RC Plane w/ Flaps 4 Channel 2.4ghz Ready to Fly 1400mm Wingspan RC Remote Control Radio Airplane
    Regular: $259.95
    SALE $199.95