Exceed RC 2.4GHz Radio System Driver Download & Support Help

Installation tips on using the PC program for the 6 Channel 2.4Ghz Tx with the Blueray RTF heli

T6 manual link

A few tips:
 

  1. Follow the video to install the driver and run it for the first time.
  2. Make sure it's communicating and click GETUSER BEFORE you make any changes.
  3. Save your settings to a default file so you can come back to it.
  4. Do not keep saving the same file name, you want to be able to revert back to a previous file if you mess something up. Name them incrementally Blueray1, Blueray2, etc.
  5. My default file is particular to MY helicopter, Your Endpoints and Subtrims are likely to be different.

Suggestions for changes over the defaults:

 

  1. Change the Endpoint values for Ch4 to -60 and + 60. This will turn down the Piro rate of the Tail.
  2. Change the AFR for Ch6 (Pitch) to -60 to reduce total pitch range to +/-9. Check and set this with a pitch gauge.
  3. Change AFR for Ch5 (Gyro Gain) to 80 initially so you don't get so much gain you get a bad tail wag. Gyro should hold pretty well w/ a max gain of 80 initially. 

T6config Install CD Files (Right click Save As)
Default T6config file for Blueray PE/SE (Right click Save As)
Defaluts (Blueray) in Text format (to manually enter)

Genesis T6Config file (Right click Save As)

If you are having trouble installing Drivers, try this:
 

  • Prolific Driver site
  • Vista Drivers Link at cooldrives
  • Find the file ser2pl.sys on the internet and install in to the Windows\system32 folder
  • Google "Vista prolific driver" 
  • Some people have had to copy the files from the CD to their desktop in order for them to install. 

Tx 6ch
Driver and install video: