Exceed RC 2.4GHz Blue Ray 450 SE RTF 3D Helicopter 100% Ready to Fly w/ Brushless Motor, ESC, Lipo Battery
The Exceed RC 2.4GHz 450 SE RTF is
a fully loaded version 2.4GHz 3D RC helicopter, 100% built, Ready-to-Fly! Light
and fast, this new machine from Exceed RC has everything you ever wanted.
The 2.4 GHz 450 SE RTF Helicopter is an
advanced RC helicopter designed with the most updated current technology
available and produced with the highest quality. While most parts are compatible
with the world's most popular 450 size electric helicopter such as the T-REX450,
the Exceed RC 2.4 GHz 450 SE RTF is designed with the best features available
while eliminating all the weak points from the current T-REX SE. All the
hardware is high A-Grade with all hex screws supplied and high quality
What is 2.4Ghz Technology?
New 2.4G Spread Spectrum technology allows the transmitter and receiver to be
'locked-on' to the same frequency ensuring much improved reliability and peace
of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more
responsive control, when compared to a standard frequency system. Third,
Operating at 2.4 Gigahertz also puts the radio control out of the frequency
range of any 'noise' caed by the other electronic components on your helicopter
- such as the motor, speed controller and any metal to metal noise - eliminating
interference and glitching that can affect traditional frequency system. Fourth,
another main characteristic of 2.4 Gigahertz equipment from a RC model club’s
point of view is that no frequency control is needed. Eliminating the need to
check everyone else's channel numbers, prior to flying. No more worries about
turning up at a club with the wrong crystal in your Tx.
The Exceed-RC 2.4GHz SE RTF uses a combination of tough,
lightweight aluminum and updated composite parts and is designed and equipped to
be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you
can have it flying in just a few hours.
We are also proud to offer this magnificent model as 3D capable right out of the
box. Combining the knowledge of RC nitro collective precision along with the
most advanced micro electric design concepts, we have arrived at a model that
excels prepared to wipe out the competition. The Exceed-RC 2.4GHz SE RTF offers
collective pitch control that will let helicopter pilots to fly in almost any
direction. Transitioning from forward flight to hover with smooth, solid control
is a cinch and negative pitch is a breeze for aerobatics like loops and rolls.
The installed mixing board controls
mixing of the main and tail rotors. The board also contains speed controls, a
external gyro for tail stabilizing and a BEC circuit that supplies power to the
receiver and servosExceed-RC 2.4GHz SE RTF will
dazzle you with agility and speed. Using the basics of micro electric design to
keep components light and durable while distributing heat away from electronic,
the Exceed-RC 2.4GHz SE RTF is not only precise, but also efficient. When you
combine precision and efficiency and add beauty, you will arrive at the
Exceed-RC 2.4GHz SE
RTF: The Ultimate Super Electric Helicopter
Expect only the best as you experience tight, precise control and quick response
LiPo Battery Charger
NOT Included. Sold Separately. Click here to
100% Ready-to-Fly 6
Channel 2.4GHz R/C Set included, complete Forward/Backward, Left/Right,
Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
High Quality A-Graded 325mm Wooden Blades
Upgraded Powerful Alpha Brushless Motor 3500KV
Volcano 30A Electronic Speed Controllers
Professional Head-Lock Gyro
New longer 3K battery mounting plate connects to main frame.
It makes the center of gravity closed to rotor blade, and can adjust the
center of gravity according to the weight of battery, it reduces the
correction when the heli rolling.
Rotor head for precision and smooth movements.
Use 35pcs precision bearing.
Great stable and sensitive mixing lever design! Can display
the great stability and precision for 3D flight.
Special adjustable pitch system, hold rotation system, tail
rotor drive belt system! It is a work of great originality for helicopter!
Using new Main rotor holder with thrust bearing and 4mm
Feathering shaft, features smooth rotation and stability under high rotation
Using Ball and Hiller two systems mixing control. Through
simple structure of Ball control system, power-saving of Hiller system and
CCPM control, can simultaneously control 3 servo for AILE, EVLE, PIT 3
actions. This control system is great for 3D flying control and extending
life cycle of servos.
New c.g. amended tail blades feature streamlined and quick,
make the gyro more efficient.
Tail rotor control set with dual bearing, features control
piece and smooth structure design, get smooth pitch travel.
Providing fly bar weight- When normal flying, you can add the
weights on fly bar paddles for stable flight. When aerobatic flying, you don't
need to add the weight, but you can see the flexibility of 3D actions.
Tail pulley assembly and tail holder are using high rigid
aluminum alloy, features wear resistant and falling resistance.
New gear ratio(4.24:1), suitable for the motor with higher KV,
provide more safety.
Using new high strength ball links and stainless steel linkage
balls on the whole unit, feature wear resistance, anti-oxidization.
LiPo Battery Charger
NOT Included. Sold
Separately. Click here to Buy One"