Esky Belt-CP RTF Advance RC Helicopter- the ready-to-fly version of the superb ESky Belt-CP

Specification:

Main Rotor Diameter: 680mm (27 inch )
Tail Rotor Diameter: 130mm (5 inch)
Length: 650mm (26 inch)
Height: 230mm (9 inch)
Flying Weight: 670g (24 oz)
Drive System: Esky 450 3800KV brushless motor
Rotate Ratio: 12:140/10:22
Servo: 4x 8g servos
Gyro: Esky Professional Gyro
Speed Controller: 25A brushless ESC
Battery: 11.1V 1800mah 20C 3-Cell Li-Polymer
Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
Radio Control Range: 2500 feet (762m)

ESKY BELT-CP .... Step up to a larger collective pitch heli than the Honey Bee CP2 or King II with the Belt CP. The Belt CP has a belt-driven tail rotor for smooth, vibration free tail control. The Belt CP is the new range developed by Esky. This is a RC helicopter with a small budget and a massive bite. It has been developed to rival the Trex in terms of capablilites and the Falcon 3D in price.

As for a gyro, no more 4 in 1 units, as with other Micro heli's; the Belt-CP is setup with a stand alone Esky gyro, which is far better suited for the performance this helicopter has to offer.

This helicopter is incredible value for money and will suit everyone from the cautious and eager to progress beginner all the way up to the more experienced pilot. (Some previous flying experience is recomended as this helicopter is not a toy).

In short the E-SKY Belt-CP is one of the best value helicopters on the market today, buy one and you will not be disappointed!

With the stock RTF kit, which comes with everything you need for flight, you simply won't find a better helicopter in this class. Capable of many aspects of aerobatic flight, the Belt-CP is perfect for those wanting more out of their current helicopters, or for those looking for a helicopter that will not be outgrown. For those wanting more out of a Micro class helicopter, the Belt-CP is the one to have.

The Belt-CP comes RTF (Ready To Fly) out of the box with no assembly required. Kit includes everything needed for flight, and is setup & ready to go.

Feature:

6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
High performace Esky 450 3800KV brushless motor used as the main drive
Powerful 11.1V 1800mAh 20C high capacitance Li-Po battery provide enough power for any aerobatic flight
Improved Body Frame(Strong & Light)
Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
Perfect for people who wants to move up from 4ch helicopter
Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
O-ring inside the center hub reduce oscillation of main blades
The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
Hard, Light weight Main Blades
Brand new design for the structure
Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
Tail rotor driven by belt provide stable flight and low noise
NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
No need to worry about burning tail motors
Light and hardened wood blades provide great lift, only weight 11g
Outer placed professional gyro
With length-adjustable servo push-rod, precision sub trim can be easily set
Extended tail boom, reduced the load of tail motor
Separate main shaft and main gear reduce repair time and noise
Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and canopy reduce the load of whole helicopter
Almost Unbreakable Rotor Head
Easy to fly and more stable lifting
PCM receiving and transmitting system increases the operation stability
CCPM mode with adjustable pitch system and 3D conversion
Provide excellent performance outdoor and indoor
Tail blade adopt flameout landing system
Metal ball swashplate has improved the stability and sensitive of the whole machine
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos can be mounted solidly by screw and easy to install
Extreme smooth control and stable flight
Precise controlling and hovering
Can fly in skyway, backward, and 3D aerobatic
Digital Proportional Motor Speed Control
Suitable for Indoor/Outdoor/Backyard/Stadium
Using the Ultra tough Carbon Fiber materials, the Helicopter does have very strong structure. In addition, the main rotor blades are using top quality wood materials, which is extremely light and not easily break.
Approximately 20 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time.
Best choice for Beginner - Advanced hobbyist
All spare parts and accessories are available
Complete Kit, Ready to Fly (Everything is included and 100% assembled -- 8 AA batteries for the transmitter also included)