E-Sky 6-Channel CCPM HoneyBee CP2 Radio Control R/C Helicopter RTF
Here's more products you may be interested in...
This model is
suitable for r/c helicopter intermediate pilot, 3D aerobatic action and inverted
flight is possible! Stunt flyer!
This is a Ready To Fly Kit, just charge the battery and fly out of box,only
need * AA Batteries for Transmitter
CCPM (cyclic collective pitch mixing) design provide precise
movement and lighten the helicopter.
Bell-hiller mixer provide immediate respond to the helicopter.
New Design HoneyBee CP2 Helicopter JUST OUT
helicopter is suitable for intermediate pilot or pilot who want to try
inverted fly and mild 3D flight.
- 120 deg
CCPM system provides precise movement if comparing with the traditional
mechanical mixing since there are less linkage/push-rod in the
helicopter,and weight is greatly reduced.
mixing greatly increase the sensitive of the whole helicopter, which
provide good aerobatic responds.
inside the center hub reduce oscillation of main blades
- 11.1V high
capacitance Li-Po battery provide enough power for any aerobatic
flight(about 15 min flight time per full charge).
- Light and
hardened wood blade provide great lift, only weigh 11g.
- Metal ball
swashplate has improved the stability and sensitive of the whole machine.
position servo mounts have been added in this heli, servos can be mounted
solidly by screw and easy to install.
length-adjustable servo push-rod, precision sub trim can be easily set.
main shaft and main gear reduce repair time and noise.
tail boom, reduced the load of tail motor.
- Weight is
a key to a EP heli, lightened skid set, main gear, main frame and canopy
reduce the load of whole heli.
excellent performance outdoor and indoor.
Wing Span = 515mm, length = 520mm
- Full 6CH RC HELI
--- EVERYONE CAN AFFORD TO TRY
- Powerful Main
Motors and Tail Motors
- 6 Channel R/C Set
included, complete Forward/Backward, Left/Right, Up/Down Control(RUDDER,
AILERON, ELEVATOR AND THROTTLE, PITCH)
- 6CH LED Display
- High Quality mixer
+ gyro board built-in..Relaible quality
- Powered by
11.1V Li-polymer 1000mAh re-chargable battery
- Easy Assembly , RTF
Ready To Fly, only need * AA Batteries for Transmitter
- About 15mins Flight
time for each charge
- Full Parts
- Suitable for
Backyard/Park (100m area)
HoneyBee CP2 CCPM Helicopter
2. Original Speed Mixer+Gyro Board
3. 6 Channel Receiver
4. 72MHz 6Ch LED Display Multifunctional Transmitter
5. 3 X 9g Servos
6. 1 Pair of Crystals
7. Li-polymer 11.1V 1000mAh Rechargeble Battery, more
8. DC 12-15V Charger for7.4 V & 11.1V Li-Po battery
9. English Manual