The EDF UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit.

EDF UCAV 101mm Electric Ducted Fan Airplane

Top Features
Top quality wood construction with fiberglass fuselage
Comes with all hardware and accessories

Specifications
Wing Span: 47.2 in / 1200mm
Wing Area : 521 sq in / 33.8 sq dm
Flying Weight : 6.6 lb / 3000 g
Fuselage Length : 58.7 / 1490 mm

Electronics Required :
4 Channels Radio Transmitter
5 Servos
EDF : 101 mm / 4 in
Brushless Motor : D36 x L 36 mm 2000 KV
Speed Controller : 22.2 V ; 85A
Li-poly Battery : 4000 mAh 25 C 22.2 V

Click here for UCAV Review/Build Thread

The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment.

The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler.

Photos

A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed.

Photos

Click here for UCAV Review/Build Thread