The Devil 500 class aerobatics model airplane is one of the newest trainers from ArtTech. The plane is constructed of EPO foam and features a large wingspan for stable and solid flight. The Devil is designed for all levels of model enthusiasts. It can be used for practice or double as a demo plane for classic aerobatic maneuvers by seasoned pilots. The main wings span 55 inches with a thick airfoil producing low wing loading resulting in high stability and flexible control. Hollow structured main wings with reinforced ribs make the wings light and rigid. The large and robust landing gears can take a good beating. The large wheels make it feasible to land on rough roads or short grass. The fuselage is also reinforced to provide extra rigidity to the airframe surrounding the servos and electronic speed controller. The power department is handled by a 850KV outrunner brushless motor supported by a 40amp brushless electronic speed controller. With an 11.1v 2400mah lithium battery, this power system will bail you out of sketchy situations. Two 9 gram and two strong 17gram servos provide authoritative control to the ailerons, elevators, and rudder. Throughout the main wings you will find red and green navigation lights that allow you to determine the orientation of the plane during low light conditions. This ArtTech Devil 500 is sure to be a great flyer for the beginner to advanced pilot looking to have some great fun.

Specifications:
-  Wingspan: 1400mm/55.1in
-  Length: 1130mm/44.5in
-  Propeller: 12×6
-  Weight (Without battery): 1135g/40 oz
-  Flying Weight (with battery): 1350g/47.6 oz
-  Horizonal Static thrust: 1300g/45.9 oz

Electronics:
-  R/C System: EFLY-4BⅡ 2.4GHz
-  Motor: Out runner brushless ST3511-KV850 
-  ESC: 40A brushless
-  Servo: 9g×2，17g×2
-  Battery: 11.1V，2400mAh

Required to Fly:
AA Batteries for Transmitter
Li-Po Battery Charger