Arduino Uno Rev3
Arduino Uno Rev3
Item Code: 82P-A000066

Rating:


Regular Price: $43.42
Sale Price: $27.50
You Save: 37%
Out of stock




Usually ships the next business day

The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter.

Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into .

Revision 3 of the board has the following new features:

  • pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.

"Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.

Specifications:


Microcontroller

ATmega328

Operating Voltage

5V

Input Voltage (recommended)

7-12V

Input Voltage (limits)

6-20V

Digital I/O Pins

14 (of which 6 provide PWM output)

Analog Input Pins

6

DC Current per I/O Pin

40 mA

DC Current for 3.3V Pin

50 mA

Flash Memory

32 KB (ATmega328) of which 0.5 KB used by bootloader

SRAM

2 KB (ATmega328)

EEPROM

1 KB (ATmega328)

Clock Speed

16 MHz




FS-TH9X 2.4GHz 9CH Transmitter - RC Helicopters/ Airplanes Transmitter Receiver
$89.95
79P-TH9X-R9B-9Channel-Radio



Usually ships the next business day

FlySky FS-T6 2.4ghz Digital Proportional 6 Channel Transmitter and Receiver System
$54.95
79P-T6-6CH-Radio-LCD



Usually ships the next business day

Fly Sky CT6B OEM Version Exceed RC 6-Ch 2.4Ghz Transmitter w/ Receiver (Full Version) for RC Helicopters & Airplanes
Regular: $74.95
SALE $44.70
ExceedRC-24GHz



Usually ships the next business day

Hobbypartz 3 Axis Gyro for Aircraft Flight Stabilizer
$19.95
73P-3AxisGyro-FixedWing-Plane



Usually ships the next business day

Thunder AC6 Smart Balance LiPo/Nimh Charger/Discharger w/ AC Adapter for 1-6 Lipo/ 1-15 Nimh w/ USB to PC Software
Regular: $75.00
SALE $48.95
Thunder-AC6-Charger-Power



Usually ships the next business day

HD 720p Dice Mini Camera with Night Vision LxWxH: 1 3/8"x1 3/8"x1 1/4"
Regular: $39.00
SALE $31.20
86P-988-Dice-MiniCam



Usually ships the next business day

NitroPlanes Daily Specials * Offers end 8/22/14