The Thunder 1030 Charger is capable of charging a variety of batteries. It has the ability to charge up to 1000 watts and deliver that power with up to 30 amps of current. This charger has a single output and it is one of the most powerful in the Thunder fleet. The Thunder 1030 will accept Li-Po, Li-Ion, or Li-Fe batteries up to 10 cells. It will also charge Nickel variants up to 25 cells and Lead Acid batteries up to 36Volts. With multiple safety features and data processing, this charger informs the user of battery condition and charge state at any time. This charger does not have an internal power supply so an external DC power of 5 – 38 Volts will be required. A 12v battery from your car will suffice, however you do want to ensure you have ample capacity in your car battery so you are not left stranded because of this chargers powerful charging ability.
Operating Software – The operating software in this charger is executed with mutual links and communications with every component to prevent error to provide maximum safety. The charging algorithm is multifarious allowing you to select the best program to suit your requirement.
Large LCD screen for displaying various charge and discharge information graphically
High-Power output circuit – The Thunder 1030 Charger employs the circuit that features high power output which are powered as much as 1000 watts. As a result it can charge and discharge batteries in a quick timeframe.
Fan cooling system provides efficient cooling for the powerful Thunder 1030 Charger
Voltage balancer for lithium batteries at output
Monitors lithium voltages on discharge preventing abnormal unbalanced discharge of battery cells
Accepts various types of lithium batteries. Li-Io, Li-Fe, and Li-Po
Operating voltage: DC 5~38 volts
Charge power: Max. 1000 Watts
NiCd/MH: 1~25 cells
LiIo/LiPo/LiFe: 1~10 series
Charge current: 0.05 to 30.0A
Discharge current: 0.05 to 30.0A
Size: 148*147*55MM Required to Operate:
Sufficient power supply with enough power to support a 1000watt 30amp rated charger