FREE SHIPPING OVER $30, ALL ORDERS SHIPPING FROM USA WAREHOUSE
LED Program Card For Brushless ESC
LED Program Card For Brushless ESC
Item Code: 07E-HobbyWing-LED-ProgramCard



$8.99
Out of stock


Model

LED Program Card (Version 2.0)

Manual

User Manual

Accessory

   

Preview

This program card is used to set the programmable parameters of brushless ESC, it has a friendly user interface to set the programmable parameters very easily. It is pocket-sized, so you can bring it to the racing or flying field conveniently.
 
This program card has 3 kinds of front panel to suitable for the following ESCs:
A)  Product Number:  LED_PC2A
      This is available for PLATINUM series aircraft/heli ESC;

 
B)  Product Number:  LED_PC2B
      This is available for SEAKING series boat ESC;

 
C)  Product Number:  LED_PC2C
      This is available for XERUN and EZRUN series (Version 2.0 ) car ESC;
 
The hardware and software of the above 3 models of program cards are identical, so you can print the different front panel when using the program card with different ESC. 
 
1  Specification

 
1.1 Size:  88mm (L) * 58mm (W) * 14mm (H)
1.2 Weight:  40g.
1.3 Input Voltage:  4.8-6V (If the ESC hasn??t a built-in BEC, you must use an additional battery pack to supply the program card)   


2  Programmable Items

 

A)  The programmable items of LED_PC2A  (Available for PLATINUM series aircraft/heli ESC)  
#1    Brake Setting
#2    Battery Type
#3    Low Voltage Protection Mode (Cutoff Mode)
#4    Low Voltage Protection Threshold (Cutoff Threshold)
#5    Start Mode
#6    Timing
#7    Governor Mode
#8    Motor Type
#9    PWM Frequency
#10  Built-In BEC Output
#11  Motor Load
#12  Lipo Cells
 
         Front Panel Picture of LED_PC2A:
B)  The programmable items of LED_PC2B  (Available for SEAKING series boat ESC) 
#1    Running Mode
#2    Lipo Cells
#3    Low Voltage Cutoff Threshold 
#4    Timing
 
         Front Panel Picture of LED_PC2B:


C)  The programmable items of LED_PC2C  (Available for XERUN and EZRUN series car ESC of Version2)
 
#1    Running Mode
#2    Drag Brake Force
#3    Low Voltage Cut-Off Threshold
#4    Start Mode
#5    Maximum Brake Force
#6    Maximum Reverse Force
#7    Initial Brake Force
#8    Throttle Neutral Range
#9    Timing
#10  Over-Heat Protection
#11    Motor Rotation
#12    Lipo Cells
(Note: The item #11 and #12 are not available for XERUN series ESC of Version 2, they only available for EZRUN series ESC)   

         Front Panel Picture of LED_PC2C:

 

t