|
Pentium-100A is the product in the "PENTIUM" series.
"PENTIUM" series has the full range of ESCs from 6A to 100A.

1 Specification
1.1
Output: Continuous 100A, Burst 120A up to 10 Secs.
1.2 Input
Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh
battery.
1.3 BEC:
None.
1.4
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM,
35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5
Size: 78mm (L) * 55mm (W) * 15mm (H).
1.6
Weight: 120g.
2 Features
2.1
Safety Arming Feature: Regardless the throttle stick
position, the motor will not spin after battery connected.
2.2
Throttle Calibration: Throttle range can be configured to provide
best throttle linearity, fully compatible with all market available
transmitters.
2.3
Programmable Items:
Brake
Setting: brake enabled / brake disabled.
Battery
Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the
output power / Cutoff the output power.
Low
Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium /
high.
Start
Mode: normal / soft / very soft.
Timing:
low / medium / high.
Reset:
reset all the programmable items to their default settings.
2.4
Full Protection Features: Low voltage cutoff protection /
Over-heat protection / Throttle signal lost protection.
3 Advantages
3.1 Military standard capacitor of extreme low resistance increases the
ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is used at the power output section,
the total thickness of copper layers is more than 0.7mm, so the whole ESC
has super current endurance capability.
3.3
Big heat sink has a very good cooling effect.
|