The AeroSky Duke B60 is a beautiful representation of a twin engine fixed wing civilian aircraft. The plane has low main wings and a high mounted horizontal stabilizer with a highly swept vertical fin. High detailed scale features include a cockpit with two pilots, retractable landing gears, and large flaps. LED navigation lights are found on the main wings and allow the pilot to see the orientation of the plane in low light conditions. Stabilizing fins are also included on the main wings to give it that extra stability. The twin 9.5x7” props are spun by two brushless outrunner motors. Two 45amp brushless electronic speed controllers deliver power from the 14.8v 3600mah 25c Li-Po battery. Eight 9 gram servos control the flaps, ailerons, elevator, and rudder. This beautiful plane is fully constructed of durable and lightweight EPO foam finished with a stunning black, blue, and white decal set.
The AeroSky Duke B60 almost ready to fly version comes with all the electronics installed in the plane. Minimum assembly is required to get this plane in the air. Install the radio system of your choice, preferably a 6 channel transmitter and receiver that allows you to work the flaps and landing gear. Add a 14.8v battery and charger and your ready to get this plane soaring in the sky.
Wingspan: 1600mm (63in)
Length: 1490mm (58.66in)
Weight: 2500g (88.18oz)
Propeller: Two 9.5x7”
Servos: Eight 9gram servos
Motor: Two 4011 OutRunner Brushless 900KV
ESC: Two 45amp Brushless Electronics Speed Controller
Required to Fly:
AA Batteries for Transmitter
Li-Po capable of 4 cell charging
Assembly of Plane
6 channel Transmitter
6 channel Receiver
14.8v 3600mah 25C Li-Po Battery